General Power Meter Functions
2
N1911A/1912A P-Series Power Meters User’s Guide
67
Procedure
1
Press
softkey to configure a trigger.
2
Select either
or
.
•
is a single shot mode. After triggering, the measurement is
halted, the
symbol is displayed. You can start another
measurement by pressing the
key.
•
is a continuos trigger mode. The symbol
or is
displayed.
3
Press
to configure the remaining trigger parameters. The
trigger
Settings
menu have two pages.
Figure 2- 52
shows page one and
Figure 2- 55
shows page two.
Figure 2-52
Trigger Setting Menu 1 of 2
To help you quickly check the triggering setup, the current settings for all
the trigger parameters are shown with their respective softkey labels.
Source
The current setting is shown below the
label.
To change the setting press
and choose
or
.
The trigger source is shown beside the trigger symbol when a
measurement window is configured in single numeric mode. When an
external trigger (
) is selected, the power meter can be triggered via the
Ext Trig input.
Acqn
Sing Trig
Cont Trig
Sing Trig
Cont Trig
Settings
Channel A is
Trigger Source
Rising Edge Source
Source
Source
Ext
Int
Ext
