Specify Stop Measurement Field
The Stop Measurement function allows you to specify a condition which
stops the analyzer measurement during a repetitive run. When the Specify
Stop Measurement field is selected, a Stop Measurement menu appears
which is used to set the stop criteria.
When the Stop Measurement type field is selected, a selection menu appears.
Depending on the analyzer configuration, you will have the choices of Off,
Compare, and X-O.
Off
The Off selection turns all Stop measurement operations off.
If the stop measurement operation is not turned off and the stop
measurement criteria are met, the measurement will stop even though the
markers are turned off.
Stop Measurement Fields
Stop measurement
selection menu
Stop measurement
Specify Stop
Measurement field
The Compare Menu
Specify Stop Measurement Field
7–11
Summary of Contents for 16517A
