Assigning Resource Term Names and Values
The Terms field identifies the list of available resource term names within the
analyzer. The resource term names (patt1
−
patt4, edge1, edge2) are default
names and can be changed if desired. The pattern and edge terms can also
have their values changed bit by bit or all at once with preset values.
Using Preset Values
When any of the individual term fields (patt1
−
patt4, edge1, edge2) are
selected, a configuration menu appears. Use this configuration menu to
quickly assign the resource term to a preset value, or to assign a customized
name to the resource term.
Resource Term Configuration Menu
Rename
This function accesses a keypad which you use to create a
custom name or edit the existing name for the resource term. This
function works for both pattern and edge names.
Clear (=X)
Sets the term assignment fields as follows:
In terms patt1
−
patt4, the assignment field is set to all "X" (don’t cares).
In terms edge1
−
edge2, the assignment field is reset to all "
.
" (periods).
Set (=1)
Sets the pattern terms to all 1s. Not available for edge terms.
Reset (=0)
Sets the pattern terms to all 0s. Not available for edge terms.
Resource term name
field
Resource term
configuration menu
The Trigger Menu
Assigning Resource Term Names and Values
4–27
Summary of Contents for 16517A
