Timing Analysis
Timing Modes:
Conventional timing.
Timing Speed:
15.3 KSa/s
−
2 GSa/s full channel, 4 GSa/s half channel.
Sample Period:
500/250 ps minimum (full/half channel mode),
65.536
µ
s maximum.
Channel Count:
16/8 per card (full/half channel mode).
Minimum Detectable Pulse Width:
4 GSa/s
800 ps, typical.
2 GSa/s or less
1.1 ns, typical.
Memory Depth per Channel:
65536 samples full channel mode;
131072 samples, half channel mode.
Time Covered by Data:
32.8
µ
s at 2 GSa/s or 4 GSa/s up to 4.3 s at
15.3 KSa/s.
Time Interval Accuracy:
±
(sample channel-to-channel skew
+ 0.005% of time interval reading).
Sample Period Accuracy:
0.005% of sample period.
Channel-to-Channel Skew across up to 80 channels:
250 ps,
typical.
Maximum Delay After Triggering:
(2 to the 20th)
×
(sample period),
or 16.78 ms at or below 16 ns sample period.
Note: When oversampling, use oversampled period for sample period above.
Trigger
Characteristics
Pattern Recognizers:
4. Each pattern recognizer is the AND
combination of bit (0, 1, or X) patterns.
Pattern Width:
16/32/48/64/80 channels.
Minimum Pattern Recognizer Pulse Width:
2.25 ns.
Edge Recognizers (Timing only):
2. Trigger on a rising, falling, or
either edge on any channel. Edges are OR’d across all channels.
Specifications and Characteristics
Characteristics
12–6
Summary of Contents for 16517A
