8210-10003 R0
27
3. Remove backing paper from decal 6” from the top and use the squeegee to adhere decal to the U-
trough (see Detail B). Start at the top center of the decal and work your way outward both left and right
using overlapping strokes.
4. As you work your way down the decal, peel back the backing paper 6” at a time. Repeat Step 3 until the
entire decal has been applied to the U-trough (see Detail C as an example).
5. Once the entire decal has been properly adhered to the U-trough, remove tape hinge from front of
decal. Remove the front application tape at a sharp 180° angle.
6. Inspect the entire decal for air pockets; if found, remove them by punching a tiny hole with a pin and
then squeegee the surface flat.
7. Squeegee the corners and edges of the decal to ensure proper adhesion and to prevent premature
peeling.
Decal Placement Technique
UCX3 S-DRIVE FIELD LOADER – PORTABLE GRAIN BELT CONVEYOR
