26
8210-10003 R0
3.10. Place the Brand and Model Decal
Important
Do not cover any existing safety or instruction decals with the brand and model decals. Also make sure
the decals do not interfere with any welded-on brackets or U-trough flanges.
• The decals should be placed as follows:
–
AGI Decal (both sides of the U-trough): place at the top of the U-trough, next to the spout.
–
Brand Decal (both sides of the U-trough): place mid to low U-trough, where it is visible and not covered
by frame arms/trussing/brackets.
–
Model Decal (both sides of the U-trough): place mid U-trough, between the “AGI” and the brand. Ensure
it is not covered by frame arms/trussing/brackets.
Brand and Model Decal Placement
Brand Decal
Model Decal AGI Decal
Note: Diagram is for reference only.
Conveyor is in lower position.
Examples of the appearance of brand and model decals:
AGI Decal
Brand Decal (example)
Model Decal (example)
• Apply decals to both sides of the U-trough.
• For each decal:
1. Prepare surface by cleaning thoroughly with soap and water. Surface must be clean and free of dirt,
grime, rust and oil. To clean oily surface, wipe with clean cloth and solvent cleaner or isopropyl alcohol.
2. Position the decal by centering it vertically on the U-trough and apply masking tape along the top,
creating a gate hinge (see Detail A ).
UCX3 S-DRIVE FIELD LOADER – PORTABLE GRAIN BELT CONVEYOR
