8210-10003 R0
101
3.34. Assemble the A-Frame
Ensure the wheels are mounted to the axle before beginning this procedure.
1. Loosely fasten the axle arms (7) to the axle (4) using one 5/8" x 5" bolt (11), three 5/8" x 2" bolts (8), five
5/8" flat washers (9), and four 5/8" nylon locknuts (10).
Note
The axle arms will be tightened after the upright arms have been installed.
2. Fasten the axle arms to the suspension bracket using 3/4" x 2" hex bolts (12) and 3/4" nylon locknuts (14).
3. Secure the slider (2) to the end of the track (towards the spout) using vise-grips.
4. Fasten upright arms (1) to the slider (2) using 1/4" x 2" cotter pins (3) and 3/4" flat washers (13).
5. Lift the spout end of the U-trough assembly until the loose ends of the upright arms align with their brackets
on the axle.
6. Fasten the upright arms (1) to the axle (4) using 1" x 3" hex bolts (5) and 1" nylon locknuts (6).
7. Tighten the bolts that fasten the axle arms to the axle.
8. Lower the U-trough assembly and remove vise grips.
Do not remove the U-trough support(s) until the conveyor is fully assembled.
11
8
9
7
4
10
12
7
14
3
13
2
1
Upright Arm
Axle
Axle Arm
5
1
6
4
UCX3 S-DRIVE FIELD LOADER – PORTABLE GRAIN BELT CONVEYOR
