AGFA ANAPURNA M4F, Operator'S Manual

Page: 57 / 62

Stay ahead. With Agfa Global Services. :Anapurna M
4F
- Operator Manual
APPENDIX 1 - Operator training checklist 57
. Anapurna Control Panel.
a. ‘ON Line’ & ‘OFF Line’.
b. Local & Host.
c. Head Gap (Calib).
d. Parameters: Left, Top & Right M Null Point (Y or N).
e. Nozzle Check (Prime).
f. ‘Pause’ function.
g. Cancelling a print.
4. Setting up the :Anapurna M4F & changing the parameters.
a. Print Head Test (Prime : Menu F1 on Control Panel).
b. Roll to roll print (optional).

Media Loading.

Vacuum Settings on the bed.

Set Gap (Head Height Calibration in regard to the media thickness).

Set Margins (Parameters).

UV Lamps (Power settings: Full / Half and Mode settings: Normal / Both).
c. Rigid media printing.

Media Set Bar.

Vacuum Settings of the table.

Set Gap (Head Height Calibration).

Left & Top Margins.

Input / output Support Tables.

UV Lamps (Power settings: Full / Half and Mode settings: Normal / Both).
d. Negative Pressure Settings.
C. MAINTENANCE.
1. Print Head Purging / Cleaning (Function of 2 way valve).
a. ‘Quick’ Purge if ‘Prime Test’ (nozzle test) not good.
b. ‘Long’ Purge.
c. Head ‘Bleeding’ (drop the negative pressure down to -.010).
d. Head Cleaning using Cleaning Solution.
2. Periodic Maintenance.
a. Daily, Weekly, Weekend, Long Break engine preparation.
D. MISCELLANEOUS.
1. Consumables Required (How to order).
a. Inks, Cleaning Solution.
b. Recommended Media (Appendix - Substrate list).
2. Have you received the Operator Manual?
. Have you received the Anapurna M4F Ink MSDS?
4. Have you printed samples on Anapurna engine using flexible & rigid media.
5. You are comfortable and you have received sufficient information to
work with the :Anapurna M4F.
Trainer’s Name + Signature Operator’s Name + Signature