Stay ahead. With Agfa Global Services.
:Anapurna M
4F
- Operator Manual
Maintenance - Maintenance Routines
4
3.2
Capping.
By pressing the capping button, the shuttle
will move to the left side of the printer.
Make sure that the capping plate is open
by turning the green switch on the control
side. The shuttle will lower itself so the
head base plate touches the capping sta-
tion. The cups of the capping station will
seal themselves on the print heads. The
print heads are now shielded from dust and
sunlight (u.v. radiation). This procedure can
be performed on weekends and is required
for long stand stills.
3.3
The ink circuit.
The inks in the :Anapurna M4F are transported via a pumping mechanisme through the
different components of the ink circuit:
ink tank
→
pump
→
filter
→
energy chain
→
sub ink tank
→
2 way-valve
→
print head
The main ink tanks are located in the door on the right side of the printer. Every
ink tank can contain 1,6 liter of ink and has a low level detection at 0, liter.
When a low level is detected, the engine will not print the next job until the
empty tank is refilled.
The main ink tanks can be refilled during printing.
Open the door and refill the tanks, keeping the
door in clean condition. You should only refill a
color when the low level alarm goes off. Shaking
the bottle is not necessary and you should pour
the complete ink bottle in the tank.
When the alarm goes off, you can check
the ink level indicators on the refill panel
which color is running empty. The top
row lights are the ink level indicators.
capping cups
protection cover
Always pour the complete ink bottle in the ink tank.
!
