AGFA ANAPURNA M4F Operator'S Manual Download

Page: 3 / 62

Stay ahead. With Agfa Global Services.

:Anapurna M

- Operator Manual

Index

Index

A. INFORMATION.

1. Safety instructions. .............................................................................................................. 5

1.1 Warning labels. ........................................................................................................... 5

1.2 Emergency switches. ................................................................................................. 6

1. Optical safety sensors. .............................................................................................. 6

1.4 U.V. light. ...................................................................................................................... 7

a. Detail of the UV light ......................................................................................... 7

1.5 U.V. inks. ....................................................................................................................... 8

a. Curing Process. .................................................................................................... 8

1.6 Extra information. ....................................................................................................... 8

2. Printer overview .................................................................................................................... 9

2.1 Front view, parts & locations. .................................................................................. 9

2.2 Home view, parts & locations. ................................................................................. 9

2. Capping station view, parts & locations. ............................................................. 10

2.4 Head carriage view, parts & locations.................................................................. 10

2.5 Rearside view, parts & locations. .......................................................................... 10

B. OPERATIONS.

1. Making your first print.

...................................................................................................... 11

1.1 Wasatch SoftRIP: setting up your image. ............................................................ 11

1.2 Starting up the :Anapurna M4F. ............................................................................. 11

1.3 Making your first print.

............................................................................................ 12

2. The Wasatch SoftRIP 6.4 AE. ............................................................................................ 1

2.1 Main Window - overview. ....................................................................................... 1

a. Menu items. ....................................................................................................... 1

b. Universal Controls. ........................................................................................... 14

c. Top tabs............................................................................................................... 14

d. Left tabs. ............................................................................................................. 14

2.2 Open an image. ......................................................................................................... 15

2. Cropping, resizing an image. .................................................................................. 15

a. Resizing. ............................................................................................................. 15

b. Cropping. ............................................................................................................ 15

c. Restore Original View. ..................................................................................... 16

d. Rotating. ............................................................................................................. 16

e. Mirroring. ............................................................................................................ 17

2.4 Choosing an imaging configuration.

..................................................................... 17

2.5 Ripping and printing the image. ............................................................................ 17

. The operator panel. (general overview) ......................................................................... 19

4. Start up & Shutdown Procedures. ................................................................................... 20

4.1 Start up Procedure ................................................................................................... 20

4.2 Making the engine ready for Printing. ................................................................. 20

4. Shutdown Procedures. ............................................................................................. 21

a. Dialy Shut Down Procedure. ........................................................................... 21

b. Weekly Shut Down Procedure. ....................................................................... 21

c. Long Stand Still Shut Down Procedure (More than 14 days) ................... 21

5. Setting up the :Anapurna M4F. (the calibration menu) ............................................... 2

5.1 Feed Adjust (F1). ....................................................................................................... 2

5.2 Carriage Release (F2). .............................................................................................. 2

5. Factory setting (F). ................................................................................................. 2

5.4 Hori. Adjust (F4). ....................................................................................................... 2

5.5 Dir. Adjust (F4). .......................................................................................................... 24

5.6 Head Gap (F6). ........................................................................................................... 24

5.7 Importance of the bi-directional alignment. ....................................................... 26

6. Changing the parameters. (the main menu) .................................................................. 28

6.1 Information bar. ........................................................................................................ 28

6.2 Function keys (parameters). ................................................................................... 29

6. Media setup. (rigids and roll to roll) .....................................................................

a. Rigid media. .......................................................................................................

b. Roll media. ......................................................................................................... 4

c. Vacuum system. ................................................................................................ 6

Summary of Contents for ANAPURNA M4F































































Search results

Summary of Contents for ANAPURNA M4F

Reviews:

Related manuals for ANAPURNA M4F

Brands by name

Popular brands

AGFA ANAPURNA M4F, Operator'S Manual

Search results

Summary of Contents for ANAPURNA M4F

Reviews:

Related manuals for ANAPURNA M4F

Brands by name

Popular brands