AGFA Anapurna H3200i LED Advanced Operator Manual Download Page 7

Page: 7 / 50

:Anapurna H3200i LED Advanced Operator Manual (v1.0)

Automatic Tension Compensation ........................................................................ 61

Using the Tension Compensation..................................................................... 62
Tips and tricks ...................................................................................................... 64

Chapter 7 Image quality procedures ............................................................................................. 67

Setting the Head Gap............................................................................................... 67

Head Gap Procedures.......................................................................................... 67
Automatic Head Gap setting ............................................................................. 67
Setting Media Thickness Manually .................................................................. 68

Checking and clearing inkjet nozzles................................................................... 69

Prime (nozzle) check print ................................................................................. 69
Dripping the Heads.............................................................................................. 71
Purging the print heads with ink...................................................................... 72

Checking and draining color heads ....................................................................... 73

Checking an Ink Circuit for Air.......................................................................... 73
Draining a color head.......................................................................................... 74

Image Quality levels ................................................................................................ 76

Calibration.................................................................................................................. 77

White ink circuit ....................................................................................................... 87

Chapter 8 Printing............................................................................................................................. 93

Configurations overview.......................................................................................... 94

Chapter 9 Curing procedure ............................................................................................................ 95

Set UV light intensity............................................................................................... 95
UV Controls in the Printing Panel ......................................................................... 96

LED Combinations of the UV Modes................................................................ 96

Chapter 10 Maintenance procedure .............................................................................................. 101

Maintenance Schedule .......................................................................................... 101

Daily Maintenance ............................................................................................ 101
Weekly Maintenance ........................................................................................ 101
Monthly Maintenance....................................................................................... 101

Summary of Contents for Anapurna H3200i LED



















































Search results

Summary of Contents for Anapurna H3200i LED

Reviews:

Related manuals for Anapurna H3200i LED

Brands by name

Popular brands

AGFA Anapurna H3200i LED, Advanced Operator Manual

Search results

Summary of Contents for Anapurna H3200i LED

Reviews:

Related manuals for Anapurna H3200i LED

Brands by name

Popular brands