15
:Anapurna H3200i LED Advanced Operator Manual (v1.0)
The Inkjet Printer is a machine with fast moving parts and powerful chemicals that present some risks.
Agfa Graphics has taken measures to mitigate these risks, but it is impossible to make the printer work completely
risk-free. There are always (new) risks.
The printer may only be used if the requirements given below are met.
2.1 General safety regulations
• The printer may only be operated by people who have been trained and authorized to use it.
• Do not leave materials or empty pallets unattended on the floor where people may trip over them.
• Keep the floor around the printer clean and tidy. Immediately remove contamination, such as spilled ink or
lubricant/maintenance materials. Slipping can cause serious injury.
• Make sure that the area around the machine is adequately illuminated,
but avoid direct sunlight on the
machine
.
• Check the presence, state and function of the safety devices every day.
• Make sure you know where the emergency switches are located, and check to make sure they work cor-
rectly every day.
• The electrical box may only be opened by qualified personnel and must be closed while the machine is in
operation!
• Do not leave the machine unattended while it is in use.
• Wear the specified personal protective equipment (see 2.6).
• Keep your hands and clothes out of the reach of moving parts.
• Tie up long hair and/or wear a hair-net.
• Always turn off the power supply (main switch) before carrying out maintenance or repair work in or on the
printer.
• Never use the machine if there is a leak, a fault or any other unsafe situation.
• Never repair (electrical or mechanical) faults with the machine yourself. They may only be repaired by
authorized personnel.
Warning:
Anybody who uses the printer must read this chapter carefully before starting the machine. The safety
instructions given in this chapter must be strictly observed together with the safety rules which are
applicable in the company where the machine is used.
