www.agfagraphics.com
40
4.6.4.2 Roll media
Left:
The scale on the ruler of the media set bar corresponds with the calibration of the printer pro-
gram and starts measuring at the beginning of the media transport.
When you want to start printing on the edge of the roll media, you enter the distance (in mm)
of the left edge of the roll media on the ruler (e.g. 50 mm in the figure shown above).
When you want to have a white border, add the desired width (in mm) of the border to the dis-
tance of the left edge on the ruler (e.g. 90 mm (50 mm + 40 mm border) in the figure shown
above)
.
Top:
Normally more images are printed after each other on roll media.
When you want to print the images against each other, you enter 0.
When you want to have a white border between the images, add the desired width (in mm) of
the border (e.g. 30 mm in the figure shown above)
.
Right:
The UV LED units may not stop above the media during printing as this may result in distor-
tion of the media. In this field, enter the distance of the shuttle travel needed to stop beyond
the media, calculated from the print (e.g. 100 mm in the figure shown above)
.
Skip Home:
Deactivated: the shuttle returns to its home position after every print pass.
Activated: the shuttle stops on the starting point for printing
(e.g. 90 mm in the figure shown
above).
Left
Left
Left (with border)
Left (with border)
Top
Shuttle
Home
Skip Home
Right
