31
:Anapurna H3200i LED Advanced Operator Manual (v1.0)
4.4.2
Ink/storage flush level indicators
The ink status and level indicators are located in the upper right corner of the screen.
4.4.2.1 Pump Ink/storage flush ON/OFF
4.4.2.2 Ink level indicators
4.4.3
Unwinder Length
4.4.4
Changing a parameter value
• The green buttons indicate whether the pumps are activated. When the
capital letter changes into a small letter, the sub ink tank is almost
empty, and the pump is active.
• 5 blocks indicate the amount of ink in the main tank.
• The capital red letter E indicates that the main tank is almost empty.
The delivery pump of each ink circuit and the storage flush can be individu-
ally enabled or disabled.
The status of each pump is shown by the button above the level indicator.
• Button green: the delivery pump is turned ON.
• Button red: the delivery pump is turned OFF (eg LM).
How to turn a pump ON or OFF:
1 Press the (green/red) button.
2 A message box pops up (eg ‘Turn OFF LM pump’).
3 Press ‘Yes’ or ‘No’.
Main ink tank
When a main ink tank is almost empty, a red letter E appears in the button
above the level indicator. Sufficient ink is available to finish the print job.
Sub ink tank
When a sub ink tank is almost empty, the capital letter in the green button
changes into a small letter (e.g. m of magenta).
Shows the remaining length (in meters) of available roll media that can be
printed. This value is important to calculate the right winder/unwinder
(PORA), (see section 6.5).
Parameter values are shown as buttons with numeric values as their title.
Pressing one of these buttons (e.g. Carriage speed), opens a value setting
pop-up:
To change a value:
1 Use the numeric buttons and/or mouse pointer.
(The new value appears in the ‘Input Value’ field).
2 Press ‘OK’ to confirm the changed value.
The buttons:
Clear: deletes the entire new entry.
Delete: deletes the last digit entered respectively.
Min: fills the minimum value allowed in.
Max: fills the maximum value allowed in.
Cancel: leaves the current value untouched.
