27
:Anapurna H3200i LED Advanced Operator Manual (v1.0)
4.1 Front control panel
* For more information, see chapter 12 “Varia”.
No.
Name
Description
1
Vacuum
Switch to put the vacuum of the media transport belt ON or OFF.
2
Media set
Switch to send the front media set bar UP or DOWN.
3
Media tension
Switch to set the tension of the media roll.
4
Print side
IN/OFF/OUT
Switch to change the wind up direction of the take up axle:
• IN: media is winded up with the print on the inside.
• OFF: the take up axle is switched off.
• OUT: media is winded up with the print on the outside.
5
Buzzer
Buzzer.
6
Emergency switch
Push button to switch the complete printer OFF in case of an emergency.
7
START ON
Push button with white indicator to start the printer.
Press the white button to start the printer.
The white lamp is lit when the printer is on.
8
PC ON/OFF
The printer can be operated via the iGUI touch screen panel.
Press the blue button on the front of the operator panel to start the PC of
the printer.
The blue lamp is lit when the PC is on.
9
White Sub-Ink Temp
PID: shows the temperature of the white ink tank.
• red digits: processing value indicator (actual measured value)*
• green digits: setting value indicator (target value)*
10
Head Base Temp
PID: shows the temperature of the head base.
• red digits: processing value indicator (actual measured value)*
• green digits: setting value indicator (target value)*
11
Color Sub-Ink Temp
PID: shows the temperature of the color ink tanks.
• red digits: processing value indicator (actual measured value)*
• green digits: setting value indicator (target value)*
12
Vacuum Control
PID: shows the pressure of applied vacuum.
• red digits: processing value indicator (actual measured value)*
• green digits: setting value indicator (target value)*
1
2
3
4
5
6
7
8
9
10
11
12
