17
:Anapurna H3200i LED Advanced Operator Manual (v1.0)
2.4 Emergency stop
2.4.1
Emergency stop switches
2.5 Unexpected printer stop
2.5.1
Malfunction of the compressed air system
When the supply of the compressed air unexpectedly stops, the printer:
• Sets off an alarm with an error ‘Air Low’ message.
• The shuttle head lifts up to its highest position
• The shuttle moves at low speed to home position.
• The ink pumps (ink flow) are stopped.
Follow the steps below to put the printer back in production:
1 Restore compressed air.
2 Confirm error window.
2.5.2
Outage electrical power supply
If the electrical mains supply falls away, the battery backup power supply circulates the white UV ink for 60 hours.
The stirrer of the white ink tank will stop, as the electrical switch is NOT driven by the battery backup. An empty
battery takes 5 days to completely charge again.
Restart the machine according to the normal start procedure.
The Inkjet Printer is equipped with emergency stop switches on the front and back
of the machine. An emergency stop switch is easily recognizable by its red color on
yellow background.
The complete printer stops immediately as soon as one of the E-stop switches is
pressed (power supply and compressed air system are disabled).
The pressed switch stays mechanically locked and it is not possible to (re)start the
machine. Before you can (re)start the machine, the pressed switch must be unlocked
by rotating it clockwise (direction arrows) until it returns to its normal position.
Warning:
• Only press an emergency stop switch in an emergency situation and not as a means to simply stop
the machine during production, because there is a risk that the machine will be irreparably dam-
aged.
• NEVER reset an emergency stop switch if you do not know who pressed the switch or why it was
pressed.
• The printer may only be restarted after the emergency situation has been rectified, the machine is in
a good condition and all the safety devices have been fitted and work correctly.
