www.agfagraphics.com
38
4.6.3
Options
Image Shift
Image Shift will allow moving the position of the printed
area on the fly during printing. This is useful should the
image come too close to the media edge due to media
drift.
Feed Adjust
Feed Adjust adjusts the feeding offset. This could be nec-
essary if you see dark or light lines appearing between
the print passes. This is media and feed speed depen-
dent. The feed offset value can also be modified on the
fly during printing if needed. This pops-up the same
panel as the Control Tab button.
Image Shift: See description below.
Feed Adjust: See description below.
Step and Repeat: See description below.
0/ x : Number of vertical copies.
Return Media: This option is used to print multiple layers
exactly on top of each other during multiple print runs.
When check-box is checked, the media is moved back
(in Y-direction) to the start position of the previous print
run. If you want to use this option, you have to check the
check-box before starting the print job.
Null Point: Return to null point. In case that the media
set bar is used as reference.
Ionizer: Ionizer on or off (normally on).
Unwinder Len.: By (un)checking the check-box
“Unwinder Len.” the function “Unwinder Length (m)” is
(de)activated, see 4.4.3..
Calib Table: Open the Calibration table, see section 7.5.
Step and Repeat
Step and Repeat will add copies of the job in the media
feeding or printing direction with the specified margin in
between.
