Using the wireless exposure button
The wireless exposure button is optional.
Ensure that there is no other equipment with remote control nearby.
Keep as far as possible from the radiation source. The wireless exposure
button operates at a distance of maximum 11 m from the device at any angle
and within sight, through glass or leaded glass. The wireless exposure button
doesn't operate through doors or walls.
1.
Press and release the wireless exposure button.
The X-ray tube is prepared for performing an exposure.
2.
Press the wireless exposure button within 15 seconds and keep it pressed
until the exposure has ended.
When the X-ray exposure is finished successfully, three beeps are heard.
WARNING:
During exposure ionizing radiation is emitted by the X-ray
system. To indicate the presence of ionizing radiation, the
radiation indicator on the control console lights up.
3.
Return the wireless exposure button to its cradle.
If the wireless exposure button is not returned to its cradle after three
minutes, the cradle of the wireless exposure button produces a sound
signal and the wireless exposure button is disabled.
Related Links
on page 42
DR 100s | Basic Workflow |
93
0411D EN 20220627 1040
