AGFA 6013/100 User Manual Download Page 99

Page: 99 / 198

Label Light

Status

The battery is being charged.
Battery charge level 75-100%.

Green

Battery charging is completed. Charge is sufficient to

perform examinations.
In order to optimize battery lifetime, it is recommen-

ded not to leave the battery permanently powered by

the charger.

Orange

Error.
Battery charging not possible.

Table 15: Battery status display

Label

Status

The battery is being charged.
Available time: Less than 30 minutes.

The battery is being charged.
Available time: 30 minutes or more but less than 60 minutes.

The battery is being charged.
Available time: 60 minutes or more.

The battery is fully charged.

Battery error.
Battery charging not possible.

Battery charger error.
Contact your local service organization.

Charging temperature is out of range.

DR 100s | Basic Workflow |

0411D EN 20220627 1040

Summary of Contents for 6013/100







































































































































































































Search results

Summary of Contents for 6013/100

Reviews:

Related manuals for 6013/100

Brands by name

Popular brands

AGFA 6013/100, User Manual

Search results

Summary of Contents for 6013/100

Reviews:

Related manuals for 6013/100

Brands by name

Popular brands