AGFA 6013/100 User Manual Download Page 142

Page: 142 / 198

Updating the configuration of a user

Only users who have a Windows administrator account can perform this task.

Use this procedure e.g. to change the Windows password of a user or to
replace a lost RFID key.

Go to the Windows

Start menu

Agfa

and click

RFID Config Tool

The

RFID Configuration Tool

dialog is displayed.

Select the user's RFID key from the list of configured RFID keys.

The configuration of the RFID key is displayed.

Click

Edit

Apply the updates to the configuration.

• If the user's RFID key was lost, put a new RFID key on the RFID reader

to fill in the serial number.
The old RFID key cannot be used to start the system anymore.

• If the password of a user has been changed on Windows, enter the new

password.
Even if the password has not changed, the password must be entered

before saving the configuration!
If multiple RFID keys are linked to this Windows user account, the

procedure must be repeated for each RFID key.

Click

Save

Click

Send to Device

The card can be used for starting the DR 100s.

Close the

RFID Configuration Tool

142

| DR 100s | Advanced Operation

0411D EN 20220627 1040

Summary of Contents for 6013/100







































































































































































































Search results

Summary of Contents for 6013/100

Reviews:

Related manuals for 6013/100

Brands by name

Popular brands

AGFA 6013/100, User Manual

Search results

Summary of Contents for 6013/100

Reviews:

Related manuals for 6013/100

Brands by name

Popular brands