Stopping DR 100s
WARNING:
Use of the equipment by non authorized personnel can cause
damages to people or things. Never leave the equipment on and
unattended. Switch the equipment off according the correct
shutdown procedures.
To stop DR 100s:
1.
Put the unit in secured position.
a) Press and hold the brake controls on the the handles while restoring
the default position of the X-ray tube head.
b) Restore the collimator to 0° position.
c) Press and hold the brake controls on the handle while fully retracting
the telescopic arm.
d) Use the handles to turn the column until the detent is aligned with the
catch.
e) Lower the arm and fully insert the detent into the catch.
DR 100s | Basic Workflow |
95
0411D EN 20220627 1040
