AGFA 6013/100 User Manual Download Page 123

Page: 123 / 198

Power status

Table 23: Power status

Icon

Description

Battery charge level is critical.
No exposure can be made.
This status can be overruled by clicking the icon, to allow one more

exposure to be made.

Battery charge level is empty.
No exposure can be made until the battery is charged again.

The device is connected to a power outlet and the battery is charg-

ing.
No exposure can be made.
This status can be overruled by clicking the icon, to allow expo-

sures to be made. The system is reverted to battery power. The

charging of the battery is temporarily stopped. Battery charging is

resumed automatically.

DR 100s | Software Console |

123

0411D EN 20220627 1040

Summary of Contents for 6013/100







































































































































































































Search results

Summary of Contents for 6013/100

Reviews:

Related manuals for 6013/100

Brands by name

Popular brands

AGFA 6013/100, User Manual

Search results

Summary of Contents for 6013/100

Reviews:

Related manuals for 6013/100

Brands by name

Popular brands