82
The support request also requires a valid Remote Services Feature Code. Verify that this is active by checking the status of
the Feature Code. Refer to “Feature Code” on page 154 for more information.
DETAILS
The Details screen provides the specific detailed information
about each of the components installed inside the GeoSteer
system or connected to it as well as any legal notices that may
need to be displayed. This information may be required by
support personnel when support is requested.
To access the Details screen, select the My Account tab from the
main AutoSteer Setup screen and then press the Details button.
The option that can be available in the Details screens are:
Roof Module
—Provides the Software Version, Serial Number,
and Warranty Key for the GeoSteer Roof Module.
Radio
—Provides the Firmware Version, Serial Number, and the
Radio Type if a radio modem has been installed.
Cell Modem
—Provides the Firmware Version, Serial Number, and Cell Modem Type if a cell modem is installed.
OmniSTAR
—Provides the Firmware Version and Serial Number of the OmniSTAR Demodulator if it is installed.
ECU
—Provides the Firmware Version, Serial Number, and type of ECU if a ECU device is connected.
Display
—Provides the Software Version, Serial Number, and Display Type of the Display if connected.
Proprietary Notices
—Provides legal notices.
To view the information for each option, use the Blue Up/Down Arrows or directly select the item on the right to view the
details related to that item. The information about the selected item will appear on the left side of the screen.
FEATURE CODE
The Feature Code screen displays all the optional features that
can be activated on the GeoSteer system and their Expiration
Date and current Status. These Feature Codes can be purchased
at any time and added using this screen. Feature Codes add
additional capabilities and functionality to the GeoSteer system
that may be useful to the owner.
To access the Feature Code screen, select the My Account tab
from the main AutoSteer Setup screen and then press the
Feature Code button.
The options and button that can be available in the External
Radio screens are:
Feature Code List
—This is a list of the Feature Codes that are available on the GeoSteer system. The available
Feature Codes are:
Glonass
—This enables the GeoSteer system to detect and use GLONASS satellites for position calculations and RTK
initialization. GLONASS is a complementary navigation system to GPS that is operated by Russia. Adding GLONASS
can improve system performance in areas where GPS satellite counts may be low due a time of poor constellation
geometry or if obstacles such as trees and buildings are blocking some satellites.
JD-Steer
—This enables the GeoSteer system to communicate directly to the John Deere ISO Bus on compatible
vehicles that have the 3rd Party Novariant Based ISO Bus unlock enabled on the vehicle to allow AutoSteering.
RTK
—This allows the GeoSteer system to use RTK for improved steering performance. This allows sub-inch
accuracy and repeatability to the system.