GeoSteer®
77
PN 2006410—ENG Rev. B
Configure SIM
In order for a custom SIM card to be used, the GeoSteer system
needs additional information about the cellular data network.
This information must be provided by the SIM card network
provider which allows the system to access the internet to
provide remote access capabilities and to get NTRIP correction
information. Follow the procedure below to configure the SIM
card to access the internet.
1.
From the Connections tab, press the Cell Modem button.
2.
Press the Configure SIM button.
3.
Press the Edit button next to <Access Point>.
4.
Enter the Access Point information provided by your SIM
Card network provider and then press the Green Check
Mark to accept the entry or the Red X to cancel.
5.
Enter the <User Name> and <Password> provided by your
SIM Card network provider in the same manner as the
<Access Point> information was entered.
6.
Once all the required information has been entered, press
the Green Check Mark to save the SIM configuration or
press the Red X to cancel.
7.
The GeoSteer system will warn the operator that the
system must be restarted before the changes take effect.
Press the Blue Check Mark to acknowledge the message
and then restart the GeoSteer system.
8.
The Cell Modem screen will show the Access Point status
as Please Reboot until the system has been restarted.
Restart the system and then return to this screen.