Maintenance and repair
Assembly instructions
EN
RA-40-2F - RA-40-4F
Date 30.10.2021
Version 2.0
45–56
9 Maintenance and repair
9.1 General notes
The rotational axis is almost maintenance-free. Nevertheless, some
maintenance work must be carried out to ensure an optimum operating
condition of the rotational axis.
9.2 Safety instructions for maintenance and repair
Also observe the safety instructions in
chapter 2 „Safety instructions“ in
this manual.
9.3 Maintenance activities and maintenance intervals
The maintenance intervals must be strictly observed. The intervals apply to
normal operating conditions and are to be shortened accordingly for other
conditions.
If the system is to be operated in an environment with abrasive dusts or
corrosive or aggressive vapours, gases or liquids, the approval of Afag must
be obtained in advance.
WARNING
Danger of injury due to improper maintenance!
Improperly carried out maintenance activities can cause considerable
damage to property and serious injury.
Only use trained specialist personnel to carry out the activities.
Always wear personal protective equipment when carrying out maintenance
and repair work!
WARNING
Risk of injuries due to uncontrolled parts movements!
Incorrect programming can trigger uncontrolled movements of the rotational
axis. Fast or unintentional movements of the rotational axis may cause injury
or material damage.
Before starting any activities, switch off the media supply and lock to
prevent it from being switched on again!
Disconnect the control cable from the axle before starting work!
