General
8 – 56
Assembly instructions EN
RA-40-2F - RA-40-4F
Date 30.10.2021
Version 2.0
1.4 Applicable documents
Each rotational axis is accompanied by a safety information sheet. This
information sheet must be read carefully by every person who carries out work
on and with the rotational axis.
1.5 Warranty
The warranty terms for Afag handling components and handling systems are
the following:
24 months from initial operation and up to a maximum of 27 months from
delivery.
Wear parts are excluded from the warranty (The customer is entitled to a
product free of defects.
This does also apply to defective accessories and
wear parts. Normal wear and tear are excluded from the warranty.
The warranty covers the replacement or repair of defective Afag parts. Further
claims are excluded.
The warranty shall expire in the following cases:
Improper use of the module.
Non-observance of the instructions regarding assembly, commissioning,
operation and maintenance of the module.
Improper assembly, commissioning, operation and maintenance.
Repairs and design changes carried out without prior technical instructions
of Afag.
Removing the serial number from the product.
Inadequate checking of wear parts.
Non-observance of the EC Machinery Directive, the Accident Prevention
Regulations, the Standards of the German Electrotechnology Association
(VDE) and these safety and assembly instructions.
1.6 Liability
No changes shall be made to the rotational axis unless described in this
instructions manual or approved in writing by Afag.
Afag accepts no liability for unauthorized changes or improper assembly,
installation, commissioning, operation, maintenance or repair work.
