USER’S MANUAL ISDN TESTER AND ANALYZER D2000
PRO
/D2000Lite/D2000
If this automatic test reports problems, e.g. unavailable services
or profiles, it’s recommended to perform a specific manual tests
2.3.1. Setting Up an Automatic Test
Define the following parameters for an automatic test:
Called number
: Enter the phone number of the called party.
•
Remote number for calls to a remote user.
•
Local number for autocalls.
Pause between calls
: Enter the number of seconds for the pause between two calls.
In some cases a pause ranging from 2 to 8 seconds is necessary to obtain correct
results.
2.3.2. Running an automatic access test
When you have defined the setup for the automatic test, continue as follows:
1
Select ‘Use this setup for testing’ in the first SETUP page.
2
Connect the instrument as displayed on the screen and
press the right cursor key.
3
Start the automatic test. The test results appear on the
screen.
CHAPTER 2 - PERFORMING AN AUTOMATIC TEST
27
Summary of Contents for D2000 Lite
Page 1: ...ISDN TESTER AND ANALYZER D2000 USER S MANUAL ISDN TESTER AND ANALYZER D2000 USER S MANUAL...
Page 170: ...ISDN TESTER AND ANALYZER D2000 PRO D2000Lite D2000 USER S MANUAL APPENDIX A 170 APPENDIX A...
Page 177: ...USER S MANUAL ISDN TESTER AND ANALYZER D2000 PRO D2000Lite D2000 APPENDIX B APPENDIX B 177...
Page 185: ...USER S MANUAL ISDN TESTER AND ANALYZER D2000 PRO D2000Lite D2000 APPENDIX C APPENDIX C 185...