ISDN TESTER AND ANALYZER D2000
PRO
/D2000Lite/D2000 USER’S MANUAL
PVc:
Informs if it is a pVc or not, and if Layer 2 is configured as DTE or
DCE.
LCI:
LCI assigned.
DATA:
Number of transmitted and received DATA messages.
RR:
Number of transmitted and received RR messages.
RNR:
Number of transmitted and received RNR messages.
Reset:
Number of transmitted and received RESET messages.
ResCNF:
Number of transmitted and received RESET CONFIRM messages.
Restart:
Number of transmitted and received RESTART messages.
RestCNF:
Number of transmitted and received RESTART CONFIRM
messages.
Reject:
Number of transmitted and received REJECT messages.
Int:
Number of transmitted and received INTERRUPT messages.
IntCNF:
Number of transmitted and received INTERRUPT CONFIRM
messages.
Diagnost:
Number of diagnostic packets transmitted and received.
Invalid:
Number of invalid packets transmitted and received.
Outseq.:
Number of out of sequence packets transmitted and received.
3.11. IP Ping Test
Use this test to verify the correct operation of the Internet connection and check if a
remote network or host is reachable, by using the ICMP protocol (Internet Control
Message Protocol). The response from the remote will provide information about the
net structure.
76
CHAPTER 3 - PERFORMING A MANUAL TEST
Summary of Contents for D2000 Lite
Page 1: ...ISDN TESTER AND ANALYZER D2000 USER S MANUAL ISDN TESTER AND ANALYZER D2000 USER S MANUAL...
Page 170: ...ISDN TESTER AND ANALYZER D2000 PRO D2000Lite D2000 USER S MANUAL APPENDIX A 170 APPENDIX A...
Page 177: ...USER S MANUAL ISDN TESTER AND ANALYZER D2000 PRO D2000Lite D2000 APPENDIX B APPENDIX B 177...
Page 185: ...USER S MANUAL ISDN TESTER AND ANALYZER D2000 PRO D2000Lite D2000 APPENDIX C APPENDIX C 185...
