89
3.
Use a rotary cutting tool, files, and sandpaper
to cut out and smooth the edges of the cooling
openings in the bottom of the cowl as shown.
Note:
Take care not to cut or scratch the cowl.
Note:
Take care and test painted areas prior to
using any type of paint remover, rubbing
alcohols or cleaners to remove any pen lines.
Manual Choke Pushrod Installation
1.
Gather the choke pushrod and ball link shown
below.
2.
Attach the ball link to the engine choke control
arm. With the top of the cowl removed, pro-
ject a line from the ball link threaded hole
slightly down and forward toward the lower
front of the cowl. This will be the approximate
location for the exit hole for the choke pushrod.
Mark this location on the lower front of the
cowl as shown.
