66
22.
Slightly lift the center brace between the air
exit holes to clear the stinger exhaust pipes
when rotating the canister to the proper
position.
23.
Canisters properly inserted through both
canister mounting formers with the stinger
exhaust pipes exiting through the air exit holes
shown below.
24.
Slip the Teflon couplers onto the drop headers
and place the spring clamps on the Teflon cou-
plers. Next slip the Teflon couplers onto the
front of the canisters as shown.
25.
Use pliers to spread the spring clamps and
slide them to properly clamp the Teflon cou-
pler to the headers and the front of the canister
mufflers.