53
9.
The required distance from the front of the
firewall to the front of the prop mount on the
engine is
8 1/4”
as shown below.
10.
Insert the (4) bolts through the engine mount,
spacers and washers. Use flat fender washers
(
not supplied
) between the spacers and fire-
wall to distribute bolt pressure. Insert the bolts
through the firewall and add fender washers
and lock nuts to secure.
11.
Tighten firmly. Use Loctite to secure.
Throttle Servo Installation
1.
Remove the 4 screws from the bottom of the
engine box cover and remove the engine box
bottom cover.
