54
2. Locate the supplied servo mounting trays, push-
rods, ball links, threaded coupler and hardware
as shown below.
Note:
Servo mounting trays have been supplied for
your convenience. However, we have chosen to
mount the throttle servo into the engine box floor.
This allows for a fast and easy installation and pro-
vides a straight and precise throttle linkage connec-
tion.
3.
If canister mufflers are to be used, install the
canister headers to the engine cylinder heads
as shown. Attach the throttle pushrod to the
engine throttle arm as shown. Layout the loca-
tion of the throttle servo and throttle pushrod
as shown. Ensure the servo and pushrod do
not interfere with the canister muffler headers.
4.
If standard style muffler cans are to be used,
install the standard muffler cans to the engine
cylinder heads as shown. Attach the throttle
pushrod to the engine throttle arm as shown.
Layout the location of the throttle servo and
throttle pushrod as shown. Ensure the servo
and pushrod do not interfere with the standard
muffler cans.
5.
When the final location of the throttle servo is
determined use a pencil to trace the outline of
the servo onto the bottom of the engine box as
shown.
