23
6.
Secure the servo connectors with safety wire,
string, tape, or other method. Ensure the con-
nectors will not come apart from vibration or
light tension. Secure excess wire from Y har-
ness and extensions inside the stab root rib
using tape or Velcro as desired.
7.
Gather the elevator control linkage parts as
shown below. There are (2) pushrods, (4) ball
link assemblies, (2) brass spacers, (2) left and
(2) right side control horns, and (12) wood
screws per stab and elevator.
Note:
There is also a
Carbon
tube for reinforcing
the pushrod (
not pictured
). This will be
installed during a later step.
8.
Assemble two pushrod and control horn as-
semblies as shown. The ball link goes be-
tween the left and right sides of the control
horn sides and is secured with a nylon lock
nut.
5.
Plug the elevator servo leads into the female
ends of the 11” Y harness as shown.
