77
1. Gather the materials as shown below. Template
material, hobby knife, ruler, tape, marker and
pencil.
COWL INSTALLATION FOR GLOW MOTORS
3. Align template with marks and Tape template to
the fuse. Mark the location of the air exit from
fuse onto template.
Note:
It may be necessary to cut a notch in the
template for the muffler.
2. Measure 1/4” back from F1 on both sides of the
air outlet as shown.
4. Mark
“Cowl Side”
on the top side of the tem-
plate. It is very important that the template does
not change position when attached to the cowl.
