37
MAIN LANDING GEAR
AND WHEEL PANT ASSEMBLY
2. Remove the Phillips head screws holding the
landing gear cover in place.
3. Align mounting holes of main landing gear with
pre drilled mounting holes in fuselage mounting
plate.
Note:
Mounting holes have been offset to ensure
proper installation of main gear.
4. Assemble the landing gear bolts with lock
washer and flat washer. Use a drop of blue Loc-
tite on landing gear bolts before attaching the
landing gear.
5. Bolt landing gear strut to fuse with (4) 8-32 bolts
and washers.
Mounting holes
have been offset
to ensure correct
installation
Main Landing Gear Installation
1.
Gather the landing gear parts as shown below.
◊
1 - Carbon landing gear strut
◊
2 - 2 1/2” Foam Tires
◊
2 - Axles with lock nuts
◊
4 - Wheel collars
◊
4 - 8-32 mounting bolts
◊
4 - 8-32 Lock washers
◊
4 - 8-32 Flat washers
◊
2 - Wheel pants
◊
4 - 4-40 Bolts
◊
4 - 4-40 Washers
