45
Throttle servo installation for 2 stroke
engine
1. Gather the following items for the throttle servo
installation.
◊
1 - Throttle servo
◊
1 - Plywood pushrod guide
◊
2 - Nylon clevises with threaded inserts
◊
1 - Pushrod guide tube
◊
1 - Throttle pushrod
◊
1 - Mounting tray
2. Mark the location of the throttle pushrod guide
tube on the firewall as shown.
3. Remove the engine and use a drill bit to drill the
holes for the throttle pushrod guide tube
4. Use blue loctite to secure the engine mounting
bolts in place. This will insure that the mounting
bolts stay in place over time. Reinstall the motor
using the 8-32 mounting bolts.
