61
15. Attach the throttle pushrod with the 4/40 ball
links and secure. Power up the receiver and
throttle servo and adjust pushrod for proper op-
eration. Ensure the servo or rod does not bind or
jam at closed or full open positions.
Choke Installation
1. Choke installation items shown below, items are
not included.
◊
1 - 4-40 metal rod threaded at one end
◊
1 - 4-40 ball link assembly with hardware
◊
1 - 4-40 Threaded insert
◊
1 - Large Zip Tie
◊
2 - Small Zip Ties
3. Location of manual choke pushrod shown be-
low.
2. We recommend installing the carburetor choke
pushrod as shown. Use nylon ties to provide
support and holding friction for the choke push-
rod. Place silicon fuel tubing over the wire
pushrod to prevent damage from vibration and
provide holding friction. Solder a threaded in-
sert on the end of the pushrod to provide a finger
grip.
