22
Elevator Servo Installation
1. The elevators have been pre-hinged and
glued
to
the stabs and are ready for flight. No other steps
are necessary for hinging. Clear covering has
been provided for sealing of the hinge gaps if
desired.
◊
1 - Stab/Elevator Assembly
◊
1 - Elevator servo
◊
1 - 1 1/4” Servo Arms
◊
4 - Servo Mounting Screws (Micro Fastener
Part number
STW0209
recommended)
◊
1 - 24” servo extension
◊
1 - Aeroworks Safety Clip
Note:
24” servo extension will be used to
connect servos to receiver during a later
step.
STAB AND ELEVATOR ASSEMBLY
2. Attach the 24” extension to the servo lead and
secure with Aeroworks Safety Clip. Ensure the
connectors will not come apart from vibration or
light tension.
3. Double check the length of the extension by lay-
ing it across the fuse as shown.
4. Fasten the pull string from the servo hole to the
male plug of the servo extension.
5. Draw the servo extension through the fuse and
pull through the radio compartment.
