29
6. Mount rudder control horns using six wood
screws.
7. Repeat the above steps for mounting the other
side rudder control horn.
8. Gather the following rudder servo items.
◊
1 - Rudder servo
◊
1 - 2 3/4” Servo Arms
◊
4 - Servo Mounting Screws (Micro Fastener
Part number
STW0209
recommended)
Note:
165 in. oz. digital, metal geared servo is
recommended. Servo selection can be the
difference between a great flying model and
a model that will crash. Always use brand
name high quality servos.
9. Install the rudder servo in the servo cutout with
the output shaft to the front.
Note:
Remove balsa stick holding the elevator pull
strings at this time. Secure the pull strings with
tape until the elevator extensions are installed.
FRONT
10. Feed one rudder cable through the pre installed
cable exit tube in the rear of the fuse toward the
front of the fuse. Repeat for other side.
Note:
Loop or tape cable to fuse to prevent cable
from being pulled into
fuse
