83
1. Gather the following items for electric conver-
sion:
◊
1 - Electrfly 1.60 Outrunner motor
◊
1 - 80 AMP Speed Control
◊
2 - 5 cell 5000mah li-po batteries
◊
1 - Great planes large outrunner motor mount
2. Use a covering iron to seal the covering before
removing any material.
3. Use a sharp X-Acto knife to remove the cover-
ing from the hot air exits.
4. Final hot air exit holes shown below. It is recom-
mended to go over the edges and seal them
down with a covering iron.
Electric Motor, Battery and ESC installation
