Aerotech Soloist CP 10, Hardware Manual

Page: 70 / 112

70 Chapter 2 www.aerotech.com
2.5.5. High-Speed User Inputs 4-5 (J104)
The high-speed inputs 4-5 are typically used as a sample signal for data collection.
Table 2-37: High-Speed Input Specifications
Specification Value
Input Voltage 5V or 24 V input voltages based on a jumper setting ( Table 2-39 )
Input Current 10 mA
Input Device HCPL-0630
Delay 50 nsec
Table 2-38: Port 0 High Speed Digital Input Connector Pins on the Auxiliary I/O Connector
(J104)
Pin# Description In/Out/Bi
3 High-Speed Input 4 + user interrupt Input
4 High-Speed Input 4 - user interrupt Input
5 High-Speed Input 5 + user interrupt Input
6 High-Speed Input 5 - user interrupt Input
Table 2-39: Input Voltage Jumper Configuration
Jumper Setting Description
JP4
1-2
(1)
No shunt option present
2-3 Shunt option present
JP6
1-2
(1)
24 V operation (High Speed Input 4)
2-3 5 V operation (High Speed Input 4)
JP7
1-2
(1)
24 V operation (High Speed Input 5)
2-3 5 V operation (High Speed Input 5)
1. Default
Figure 2-39: High-Speed User Inputs (J104)
Soloist CP Installation and Configuration