Aerotech Automation1 iXR3, Hardware Manual

Page: 58 / 112

2.4.1. PSO Isolated Outputs
This output signal is a fully-isolated 5-24V compatible output capable of sourcing or sinking current.
Refer to
Figure 2-27 and Figure 2-28 .
This output is normally open and only conducts current when a PSO fire event occurs.
The PSO Isolated Outputs are overload protected and will turn off if the maximum output current is
exceeded.
Table 2-21: PSO Isolated Output Specification
Specification Value
Outputs (±) 5-24 V, 250 mA
Table 2-22: Isolated Output Pins on the PSO Connector
Pin # Description In/Out/Bi
15 PSO Output 3 - (Isolated) [A3200: PSO Output 2 -] Output
16 PSO Output 3 + (Isolated) [A3200: PSO Output 2 +] Output
17 PSO Output 2 - (Isolated) [A3200: PSO Output 1 -] Output
18 PSO Output 2 + (Isolated) [A3200: PSO Output 1 +] Output
19 PSO Output 1 - (Isolated) [A3200: PSO Output 0 -] Output
20 PSO Output 1 + (Isolated) [A3200: PSO Output 0 +] Output
Figure 2-27: PSO Output Sources Current Figure 2-28: PSO Output Sinks Current
2.4.1. PSO Isolated Outputs iXR3/XR3 Hardware Manual
58 www.aerotech.com