Aerotech Automation1 iXR3 Hardware Manual Download Page 10

Page: 10 / 112

Agency Approvals

Aerotech tested its XR3 drive racks and found that they obey the standards that follow:

IMPORTANT

: iXR3 certification is pending.

Approval:

CUS NRTL

Approving Agency:

TUV SUD America Inc.

Certificate #:

U8 068995 0027 Rev. 02

Standards:

CAN/CSA-C22.2 No. 61010-1:2012,
EN 61010-1:2010/A1:2016,
UL 61010-1:2012

Approval:

Safety Components (STO)

Approving Agency:

TUV SUD

Certificate #:

Z10 068995 0030 Rev. 00

Standards:

EN ISO 13849-1:2015 (up to PL e),
IEC 61508-1:2010 (up to SIL3),
IEC 61508-2:2010 (up to SIL3),
IEC 61800-5-2:2016,
IEC 62061:2005 (up to SILCL3),
IEC 62061:2005/AMD1:2012 (up to SILCL3),
IEC 62061:2005/AMD2:2015 (up to SILCL3)

Visit

https://www.tuev-sued.de/product-testing/certificates

to view Aerotech's TÜV SÜD certificates.

Type the certificate number listed above in the search bar or type "Aerotech" for a list of all Aerotech
certificates.

Agency Approvals

iXR3/XR3 Hardware Manual

www.aerotech.com

Summary of Contents for Automation1 iXR3

















































































































Search results

Summary of Contents for Automation1 iXR3

Reviews:

Brands by name

Popular brands

Aerotech Automation1 iXR3, Hardware Manual

Search results

Summary of Contents for Automation1 iXR3

Reviews:

Brands by name

Popular brands