Aerotech Automation1 iXR3, Hardware Manual

Page: 21 / 112

1.1. Electrical Specifications
The electrical specifications for the drive rack are listed in Table 1-3 and the electrical specifications
for the servo amplifiers in Table 1-4 and Table 1-5 .
IMPORTANT : These electrical specifications represent the maximum capability of a
feature. System constraints can result in lower performance. For example, the motor
output specifications are affected by the Bus supply, the number of axes that are
operating at the same time, the type of motion, the AC Line voltage, and motor
requirements.
The power label shows the factory-configured AC power requirements ( Figure 1-4 ).
DANGER : Update the AC power label if you reconfigure the AC Input Voltage.
Figure 1-4: iXR3/XR3 AC Power Label Location
iXR3/XR3 Hardware Manual 1.1. Electrical Specifications
www.aerotech.com 21