manualshive.com logo in svg

Aeris ATMOS ai, Operating Manual

Share
Download
Aeris ATMOS ai Operating Manual Download Page 84

84

RESET FEATURE

This dive computer is configured with a RESET feature that allows data to be cleared, including

Nitrogen and Oxygen calculations, FO2 set point, Log Mode entries, and Download data.

WARNING:  Reset after a dive and subsequent use for a repetitive dive con-

ducted by the same diver could result in serious injury to or death.

RESET PROCEDURE

•  While in SURFACE MODE (new activation period or greater than a 10 minute post dive sur-

face interval), press the Advance (Front) button one (1) time to access PLAN MODE.

•  While 30 feet (or 9 meters) is displayed in the PLAN MODE, press and hold Both buttons until

SET 2 appears, then release the buttons.

•  Press and release the Advance (Front) button to display the first 2 digits of the KEY CODE,

flashing as 00.

•  Press and release the Select (Bottom) button to increase the digits to 

01

.

•  Press and release the Advance (Front) button again to display the second 2 digits of the KEY

CODE, flashing as 00.

•  Press and release the Select (Bottom) button to increase the digits to 

01

.

•  Press and release the Advance (Front) button to complete the RESET operation and turn the

unit OFF.

Summary of Contents for ATMOS ai





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands