41
TO SET - SAMPLING RATE
(while in the Surface Mode)
Factory set for 15 (seconds), the Sampling Rate can be set to val-
ues of 2, 15, 30, or 60 (seconds), or 2, 5, 10 feet (.5, 1.5, 3 meters).
Sampling Rate is the interval at which data samples are recorded
during a dive for subsequent download to the PC program. This
setting has no effect on displayed data or data in the unit's Log.
Press Both buttons simultaneously, release when
SET: 2
ap-
pears.
Press and release the Advance (Front) button, the Units screen
appears with the set point
flashing.
Press the Advance (Front) button
15 more times.
The graphics SR and SECS (or FEET/METERS) appear with
the
Sampling Rate
value
flashing (Fig. 38).
Press and release the Select (Bottom) button to advance the
Rate one selection at a time.
Press the Advance (Front) button to accept the setting and ad-
vance to Set Digital Gauge Mode, or press and hold Both but-
tons for 2 seconds to revert to Surface Mode.
Fig. 38 - Set Sampling Rate
