24
SET MODES
To help simplify the operations you might perform at the dive site,
settings are divided into 2 categories. Set Mode #1 includes sev-
eral settings that you would change more often and Set Mode #2
includes those items not likely to change once you set them. Set
Mode 2 can be accessed by first entering settings in Set Mode 1, or
by bypassing Set Mode 1.
After gaining access to Set Mode 1 or Set Mode 2, settings can be
made in sequence one after the other, or you can access a specific
item that you want to set by bypassing others. The descriptions
that follow describe access to each setting from Surface Mode.
Set Mode Access Timing
While in Surface Mode, press Both buttons simultaneously and
hold -
after 2 seconds, SET: 1 appears (Fig. 16)
after 4 seconds, SET: 2 appears (Fig. 17)
Access is gained to Set Modes by releasing the buttons during
the 2 second window in which SET: 1 or SET: 2 appears, then
pressing the Advance (Front) button.
If the buttons are held longer and SET 1 and 2 are both by-
passed, the unit will go to Simulator Mode which is described
on page 71.
While in the Set Mode, if neither button is pressed during a pe-
riod of 2 minutes, the unit will revert to Surface Mode.
Fig. 16 - Set Mode 1
Fig. 17 - Set Mode 2
