69
To view that dive's Log
(Fig. 65) -
Refer to page 72 for a description of the Log Mode and displays.
press the Advance (Front) button
1 time
press the Select (Bottom) button
1 time
to view the Nitrogen
data screen
press the Select (Bottom) button
again
to view the Oxygen data
screen (if a nitrox dive)
press Both buttons simultaneously for 2 seconds to return to
Surface Mode
the unit will automatically revert to Surface Mode after 2 min-
utes if no button is pressed
Log Data will not be stored in the unit's memory until the 10
minute Transition Period on the surface is completed.
Once 10 minutes have elapsed, the Surface Mode icon and Surface
Interval time display colon stop flashing indicating that the Dive
and Transition Period are completed, and a subsequent descent will
be considered a new dive.
If you descend during the 10 minute Transition Period, time under-
water will be considered a continuation of that dive. The time at
the surface (if less than 10 minutes) will not be added as Dive
Time.
Fig. 65 - Log Mode
