manualshive.com logo in svg

Aeris ATMOS ai, Operating Manual

Share
Download
Aeris ATMOS ai Operating Manual Download Page 76

76

•  If no dive is made, the unit would shut off after 2 hours, then

automatically reactivate again, repeating the action until cleaned

and dried.

DOWNLOADING DATA TO A PC

Using special linking hardware, dive data can be downloaded (cop-

ied) from your ATMOS ai to an IBM compatible PC program run-

ning on a Windows

®

 operating system.

Compatibility requirements and instructions are provided with the

optional download package that is available from your Authorized

AERIS Dealer.

The software program provides  tabular and graphic profile data

sampled throughout the dives.  See page 41 for setting Sampling

Rate.

The Interface Cable will be connected to the Data Port located on

the side of the ATMOS ai housing.

Prior to attempting to download data from your ATMOS ai, refer

to the instructions provided in the User Manual that is incorporated

into the CD for the download hardware/software package.

Refer to page 28 of this manual for instructions regarding access to

PC Interface (Fig. 75).

Fig. 75 - PC Interface

NOTE:

Ensure that the

Download product

that you acquire is

compatible with the

ATMOS ai and the

PC equipment that

you will be using.

Summary of Contents for ATMOS ai





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands