78
SIMULATOR MODE
This mode provides you with the ability to practice various dive
mode scenarios and computer functions while observing the vari-
ous displays.
At any time while in Simulator Mode, pressing and holding
both buttons simultaneously for 2 seconds shall revert operation
to real Surface Mode.
The real set points entered into the ATMOS ai do not affect the
operation of the Simulator which has its own settings that allow
Digital Gauge Mode to be set ON or OFF, calculations to be
cleared, and FO2 to be set.
Access and Setup
(while in real Surface Mode)
Press and hold Both buttons for 6 seconds.
Release the buttons during the 2 second window when
SIM
and
DEMO
appear (Fig. 76).
Press and release the Advance (Front) button to access SIM
MODE. The graphics
GAU
and
DEMO
will appear with
OFF
(or ON) flashing (Fig. 77).
When set
ON
, the SIMULATOR will operate as the unit would
in User Set Digital Gauge Mode only displaying Depth and
Elapsed Dive Time. When set
OFF
, it operates as it would as
an Air or Nitrox computer.
Press and release the Select (Bottom) button to toggle between
Gauge
ON
and
OFF
.
Fig. 77 - Set Demo Gauge
Fig. 76 - Simulator Mode
